WHOLESALE PRODUCTS INFORMATION PAGE
 

 

 


USES FOR WIRE GLUE

Computer Repair
Radio and TV Antennas
Ham Radio Repair
Science Projects
Surface Mount Component Repair
Model Trains
Telephone Repair
Xbox / Xmods
DIY
Solar Panel Wiring
Electrically Bond Fabrics
Repair Phone Lines

Electrically Connect Steel & Aluminum
Cell Phone Repairs
Bell Wiring
Install Phone Lines / Bell Wiring
Audio Systems
Car Stereo
Hobby Projects
Home Electronics
Cable TV Connections
CB Radio
Flashlights
Christmas Tree Lights
Boats/Marine

AND MUCH MORE

It Repairs...

Game Controllers
Remotes for TVs and DVD Players
Home Access Security Keypads
Parking Access Keypads
Garage Door Opener Keypads

AND MORE

It Cleans...

Leakage from all types of batteries
Corrosion in music equipment battery compartments and on their springs
Corrosion on computer keyboards from leaking memory backup batteries

And it cleans battery contacts of...

toys
remotes
radios
TVs
cell phones
Cameras

AND MORE

SURFACE MOUNT COMPONENT FIX

No Solder - Permanent Repair

Replace Surface Mount Components Without Using Solder

This page was updated on September 21, 2017


Here is some information about Fixit Products main products, Wire Glue, Keypad Fix, Corrosion Gone!, and now Surface Mount Component Fix

If you have any questions about our products please contact:

info@fixitproducts.us

ALL FIXIT PRODUCTS ARE MADE IN THE U.S.A.


WIRE GLUE

WIRE GLUE is sold worldwide in retail chain stores as well as small shops, plus in hobby and electronic catalogs and on-line stores, as well as on Ebay and other on-line auction sites.

WIRE GLUE is a micro-carbon-based Conductive Glue glue that connects wires together in one simple step, then conducts electricity. This is all without any soldering or heating, plus unlike solder, it's lead-free.

WIRE GLUE IS ECOLOGICALLY FRIENDLY - CONTAINS NO HARMFUL CHEMICALS OR FLAMMABLE SOLVENTS

- Lead-Free and No Heating Involved
- For both AC and DC low voltage circuits
- Drying Time: To touch: 2 hours; Through: 12 to 48 hours (Depending upon temperature, relative humidity coating thickness, and substrate)
- Density: 0.6 grams per cubic centimeter
- Application Temperature Range: 40F (4C) to 110F (43C)
- Service Temperature Range: 0F (-17.8C) to 180F (82.2C) constant; -20F (-29C ) to 200F (93C) intermittent
- Conductivity: 13.16 Ohms per cubic centimeter
- Net Wt.: 0.3 fl oz of Wire Glue per jar


KEYPAD FIX

KEYPAD FIX Permanently Repairs All Rubber Keypads.
This means Game Controllers, Remotes for TVs and DVD Players, Home Access Security System Keypads, Parking Access Keypads, Garage Door Opener Keypads, Car Remotes and more.
These are tough, flexible wear-resistant repairs.

KEYPAD FIX IS A NON-TOXIC GREEN ALTERNATIVE TO THROWING AWAY WORN OUT KEYPADS


CORROSION GONE!

CORROSION GONE! Battery Spring and Contact Cleaner
Swab It On. Scrub It Clean.
Cleans Corroded Electrical Contacts.

CORROSION GONE! cleans leakage from all types of batteries including alkaline, nicad, nickel metal hydride and low cost zinc carbon cells.
Great for cleaning up corrosion in music equipment battery compartments and on their springs -- effects boxes, tuners, headphone amps, etc.

C
leans corrosion on computer keyboards from leaking memory backup batteries.
Revitalizes circuit boards that have been damaged by leaking electrolytic capacitors.
Rejuvenates battery contacts on all battery-powered equipment including toys, remote controls, radios, TVs, cell phones, cameras, and more.

ANOTHER USE FOR CORROSION GONE!
Corrosion Gone! can also be used as a Precision Rust Remover.
Just rub it on the rusted areas where you want the rust to be gone. It will act like a fine-grade sandpaper, but unlike sandpaper it gets into all corners and crevices. And because it is activated by rubbing, it only works where you want it to, not all over the place like Naval Jelly, which is great for dissolving rust but also dissolves paint or other coatings that you may want to preserve. So with careful application you can use Corrosion Gone! to remove the rust that you want to remove without wrecking painted areas that are right next to the rust. So for hobbyists, model railroaders, and all others who need a Precision Rust Remover, Corrosion Gone! is perfect for that.


SURFACE MOUNT COMPONENT FIX

No Solder - Permanent Repair - Replace Surface Mount Components Without Using Solder -
Non-toxic

If you've ever tried to replace a surface mount part without specialized soldering and desoldering equipment, you know it's next to impossible. But Surface Mount Component Fix will allow you to glue parts in easily with its special conductive glue formulation. Great for Computer Motherboard repairs. These are tough, flexible wear-resistant repairs.

SURFACE MOUNT COMPONENT FIX IS ECOLOGICALLY FRIENDLY - CONTAINS NO HARMFUL CHEMICALS OR FLAMMABLE SOLVENTS